Daler-Rowney - System3 - Drawing Liquid for Screen Printing - 75ml

System3 screen printing liquid is applied directly to the screen with a brush to create the desired image. It can be used without water, but requires dilution with water for the finest details. Once dry, the entire surface of the frame is covered with System3 Insulating Gel, spread with a squeegee. Once dry, the screen should be washed in cold water to leave a positive print-ready image in the open mesh. After printing, the frames can be recovered by cleaning them with very hot water. Then vigorously brush the frame using a suitable brush and a very powerful soapy solution such as undiluted washing-up liquid. The frame must be kept upright and at room temperature.