EPODEX - Epoxy Resin - Transparent / Clear - 1,5kg - ECO System (1CM)
€58.00
Always start with an epoxy resin primer to avoid high material loss and blistering (layer thickness: 0.2-0.5mm). To do so, simply use a portion of the same clear epoxy resin. Mix resin A-component with hardener B-component.
Stir through the edge and bottom of the mixing cup as material...
- Always start with an epoxy resin primer to avoid high material loss and blistering (layer thickness: 0.2-0.5mm). To do so, simply use a portion of the same clear epoxy resin. Mix resin A-component with hardener B-component.
- Stir through the edge and bottom of the mixing cup as material will settle there. Ideally, pour into a clean mixing cup and mix again until the mixture is streak-free. This ensures that the resin A-component and hardener B-component are completely mixed together.
- Pour the resin-hardener mixture onto the surface to be coated immediately after mixing, as the product may boil in the mixing cup depending on the system and the amount of substance.
- Paint the epoxy primer with a paint roller or brush on the desired surface. We recommend rollers made of polyamide.
- Let the primer cure. The curing time varies depending on the temperature, layer thickness and epoxy resin system.
- Continue with the main coating in the same way. Processing times, pouring heights and curing times vary depending on the epoxy resin system selected and the application.